1650 Loretta Avenue Ÿ Feasterville, PA  19053  U.S.A Ÿ Phone: 215-953-9797  Ÿ  Fax: 215-953-9399

 PRESS RELEASE

 For Immediate Release

CF-2000 Fully Adjustable Axial Lead Former

FEASTERVILLE, PA – Form axial components to almost any configuration with Manix Manufacturing’s new CF-2000 bench top lead forming system. Snap-ins, stand-offs, verticals, and 90° bends are all easily achieved at speeds up to 20,000 pph.

The CF-2000 is easily adjusted to satisfy an almost limitless variety of axial forming applications. Lead spacing, lead diameter, leg length, body size, stand-off height, and dimple depth adjustments are each independent of the other, allowing uneven cut lengths, form centers, or vertical axial forms, if desired. Lead diameters from 0.016" to 0.060" can be cut and formed to Mil-Spec standards. Since each lead is clamped before cutting and forming, damage or component stress is eliminated. Components are fed into an adjustable conveyor where they are cut and formed in the various stages. The finished component exits the conveyor and is deposited in a specially designed component drawer. Scrap tape or excess lead material is separated from the finished components.

The standard tooling supplied with the CF-2000 accommodates all cut-only forms, horizontal 90° bends, snap-in and stand-off forms. To switch from snap-in to stand-off, operators need only reverse two standard dimpling inserts. Vertical form or flush-mount lock-in tooling are the only tooling options you may ever need.

The CF-2000 is just another add-on to our already popular CF Series Lead Formers.  The CF Series is still the only system available today that can form axials and radials on the same base. 

For additional information contact: Ira Schafer, Lead Forming Product Specialist (215) 953-9797   Visit us on the Web: www.manixmfg.com E-Mail us at: sales@manixmfg.com

Visit our Axial Page