 |
|
|
 |
Base
Counter Can Be Adapted for Use with Axials, Radials and SMDs
The CC-15 electronic counter has been widely used throughout the industry
in conjunction with lead forming operations or for general work preparation, kitting, and
inventory control. Capable of counting to 999,999 (in both directions), the CC-15
also features a divider switch that allows it to count multi-leaded devices or SMDs on
tape of various pitches. While the basic CC-15 can be used for hand
feeding of taped axial or radial devices through the photosensor, it can also be adapted
to a reel-to-reel assembly for axials and radials (the CB-111) or a
reel-to-reel assembly for taped surface mount devices (the CB-112). Both
systems are universally adjustable to accommodate varying tape widths. The CC-15 may
be battery operated, but is also supplied with an AC adapter.
Up and
down counter with 6-digit display up to "999999"
Divider ratio setting 1...8
Counting speed 100
counts/sec
Accuracy: +/1 digit
Equipped with rechargeable
NiCd cells
Dimensions: L=190 mm
(7.48"), W=100 mm (3.94"), H=30 mm (1.18")
Detects component wires from
0.4 mm (0.016") to 1.5 mm (0.059") diameter
|
|
|
