Reflow

Manix Manufacturing combines the industry's most advanced reflow technology with the industry's most comprehensive design, resulting in a full range of systems to meet virtually any production requirement. No other manufacturer offers this many features as standard equipment on any comparably priced system:

When it comes to reflow soldering, there is only one thing that separates the needs of the high-volume manufacturer from that of the low-volume manufacturer. Not process control...not reliability...not even PCB size capacity...but simply...throughput. Manix has made the reflow selection process just about as simple as you can make it, by offering four different systems that differ from one another only by their heated length and physical size (therefore their throughput capacity). All other features, including conveyor width, are identical. The greater the heated length, the faster the belt speed that can be utilized to maintain an identical thermal profile as that of a comparable system with a shorter heated length.

High-Volume Production

TSC-1008

Total heated Length:
Pre-heat Length:
Main Heat Length:
On-Load Length:
No. of Heater Panels:
No. of Controlled Zones:
No. of Vertical Zones:
Overall System Length:
Maximum Temperature:
Temperature Accuracy:
Convection to IR Ratio:
System Width:
System Height:
Above Belt Clearance:
Belt Speed:

76"
26"
40"
28"
12
10
5
144"
350° C
ą1° C
95%/5%
48"
75"
2.75"
0-50" per min.

TSC Specification Booklet

TSC-1210

123"
52"
52"
28"
16
12
6
191"
350° C
ą1° C
95%/5%
48"
75"
2.75"
0-50" per min.

TSC Specification Booklet

TSC-1412

147"
52"
76"
28"
20
14
7
215"
350° C
ą1° C
95%/5%
48"
75"
2.75"
0-50" per min.

TSC Specification Booklet

TSC-1614

171"
76"
76"
28"
24
16
8
239"
350° C
ą1° C
95%/5%
48"
75"
2.75"
0-50" per min.

TSC Specification Booklet

Low-Volume Systems

TT5-C

Windows Based Control Software
Ultra-High Mass Heater Panels

Full Profiling & Data Logging

For Prototyping, Development or Low-Volume Production

Manix Manufacturing's TT5-C is designed for prototyping, developmental applications and low-volume production. Based on Manix Manufacturing's high-volume, low-velocity air flow management and ultra-high mass heater panel technology, the computer-controlled TT5-C can very closely simulate profiling usually only attainable on high-volume production models. TT5-C systems can even handle large 16" x 18" PCBs. The Windows based control software of the TT5-C offers most all of the advantages of Manix Manufacturing's high-volume production models, including full profiling, chart recording and data logging capabilities. TT5-C systems have 5 controllable heat zones, can attain a maximum temperature of 350°C, and feature a total heated length of 42". Belt speed is variable from 0-27" per minute. Like all Manix reflow systems, the TT5-C includes a 1 year warranty on parts and labor, a 5 year warranty on heater panels and a free day of installation and training.

TT5-C Specification Booklet

	*Ultra-High Mass Heater Panels for Maximum Insensitivity to Load Variance*
	*High-Volume, Low-Velocity Air Flow; Ideal for Fine Pitch QFPs, BGAs & Flip Chips*

	*Windows Based Control Software with Real Time Chart Recording, Alarms, Data-Logging*
	*On-Line Storage Capacity for Thousands of Programs and Temperature Profiles*
	*The Industry's Most Advanced Process Monitoring and Alarm System*

	*EPS Battery Backup for Safe Recovery During Power Loss*
	*Free On-Site Installation and Training*